HPI 1:8 Vorza S Truggy flux RC Car

SKU: HPI-160182

HPI 1/8 Vorza S Truggy flux RC Car

Technical Specifications:

Input Voltage: 3-6S LiPo

Continuous Current: 150A

Burst Current: 950A

Resistance (Ω): 0.0035

Motor Limit: 4S LiPo <3000KV, 6S <2400KV

BEC: 6V/3A Switching BEC

Connector: 6.5mm Bullet

Dimensions: 59.5x48x42mm

Weight: 178g

Motor and Battery Combinations

The FLUX brushless motors requires very powerful batteries to get the most out of them - please make sure that you use the right combination! HPI highly recommend the use of LiPo batteries above 4000mAh and 40C. Using batteries with lower ratings, or the use of lower quality LiPo batteries, may cause damage to the battery and/or speed control. Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries. The term Kv refers to the number of RPMs that the motors will try to deliver per volt applied and is a standard term for brushless motor power.

WHAT YOU NEED:

2 matching Battery Packs with T-Plugs

Battery Charger, HPI Recommends:

Note: the battery packs required for the Vorza FLUX are two identical high-quality LiPo batteries with at least 4000mAh capacity and 40C discharge rate. A Single 4S or 6S Pack could be used with a bridging adaptor.

4 AA Batteries for Transmitter